Kyocera ECOSYS M2040dn Operation Manual page 177

Operation on the Machine > Sending Document to Desired Shared Folder on a Computer (Scan to PC)
5
6
7
The table below lists the items to be set.
Item
*1
Host Name
Path
Login User Name
Login Password
*1 You can also specify the port number. Enter the following format separated by a colon.
"Host name: port number" or "IP address: port number"
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [2001:db8:a0b:12f0::10]:445)
If the port number is not specified, the default port number is 445.
Check the status.
The connection confirmation screen appears. Select [Yes] to check the connection and [No] to
not check it.
"Connected." appears when connection to the destination is correctly established. If "Cannot
connect." appears, review the entry.
To send to multiple destinations, repeat steps 3 to 4.
Destinations can be changed later.
Confirmation Screen of Destinations (page 5-34)
Select the functions.
Select the [Function Menu] key to select the send functions to use.
Send (page 6-4)
Press the [Start] key.
Sending starts.
Detail
Computer name
Share name
For example: scannerdata
If saving in a folder in the shared folder:
share name\folder name in shared folder
If the computer name and domain name are the same:
User Name
For example: james.smith
If the computer name and domain name are different:
Domain name\User name
For example: abcdnet\james.smith
Windows logon password
(Case sensitive.)
5-17
Max.
characters
Up to
64 characters
Up to
128 characters
Up to
64 characters
Up to
64 characters