Overwriting Program; Deleting Program - Kyocera ECOSYS M2040dn Operation Manual

Operation on the Machine > Program

Overwriting Program

1
.
2

Deleting Program

1
2
Configure the settings of the functions.
Set the function to change.
For the settings of functions, refer to the following:
Using Various Functions (page 6-1)
NOTE
In the case of the sending function and fax function, a destination is also registered in the
program.
Overwrite the program.
1
Press the one of the [Program I] to [Program IV] keys to change and hold it (2 seconds or
more).
2
[▲] [] key > [Overwrite] > [OK] key > [Yes]
Register the changed program.
Display the screen.
Press the one of the [Program I] to [Program IV] keys to delete and hold it (2 seconds or
more).
Delete the program.
[▲] [] key > [Delete] > [OK] key > [Yes]
5-10