Kyocera ECOSYS M2040dn Operation Manual page 343

Troubleshooting > Troubleshooting
Message
Cannot duplex print on
this paper.
↑↓ (Displayed alternately)
Press OK to using MP
Tray.
Cannot read data in this
ID Card.
Cannot recognize.
Cannot use this
function.
>> #####
Close # cover.
Close the document
processor and its cover.
Cooling...
Please wait.
E
Message
Error occurred. Turn the
power switch off and on.
F
Message
Failed to store job
retention data. Job is
canceled.
FAX memory is full.
Checkpoints
Did you select a paper size/type
that cannot be duplex printed?
―
―
―
Is there any cover which is open?
Is the document processor open?
―
Checkpoints
―
Checkpoints
—
—
10-19
Corrective Actions
Select [Paper] to select the
available paper. Select the [OK] key
to print without using Duplex
function.
In registration process, the ID card
information was not read correctly.
Hold again the ID card over the ID
card reading part.
If the same message still appears,
the ID card may not be compatible
with this product. Change it to
another ID card.
Make sure your ID card has been
registered.
This job is canceled because it is
restricted by User Authorization or
Job Accounting. Select the [OK] key.
Close the cover indicated on the
screen.
Close the document processor.
The machine is under the
adjustment to maintain its quality.
Please wait.
Corrective Actions
System error has occurred. Turn the
power switch OFF and then ON.
Corrective Actions
The job is canceled. Select the [OK]
key.
FAX cannot be performed any more
due to insufficient memory. The job
is canceled. Select the [OK] key.
Reference
Page
―
―
Card
Authentication
Kit (B)
Operation
Guide
―
―
―
―
Reference
Page
―
Reference
Page
—
FAX
Operation
Guide