Installation - Fluke Datapaq Food Tracker User Manual

Insight Setup
Before the logger is used for the first time, you must:
1. Install Insight software.
2. Establish communication between the logger and the computer/software.
Installing/Removing Insight
Datapaq Insight used with the MultiPaq21 logger requires the following minimum
computer specification.
• 1 GHz processor.
• 2 Gb RAM.
• Monitor resolution 1024 × 768, 256 colors.
• 100 Mb free hard-disk space.
• DVD drive.
• 1 free USB port.
• Microsoft Windows™ XP, Vista, 7, 8 or above.
• Microsoft Internet Explorer 4 or above.
The MultiPaq21 logger operates only with Datapaq Insight v.2.0 and above.

Installation

Ensure you are logged into Windows in Administrator mode.
For most systems, installation will start automatically on placing the Insight DVD
in the drive. (If installation does not start, click the Windows Start button and
select Run; browse to your DVD drive, and run Setup.exe.)
Follow the on-screen instructions. You will need your license number to hand,
which is to be found on:
• Your license agreement.
• The outside of the DVD case.
• The outside of the system packaging.
Insight's link with the logger must also be made while Windows is in
Administrator mode, and it is thus best to do this now, as part of the Insight
installation: connect the logger to the PC and follow the procedure under
FOOD TR ACK ER
Insight Setup
13