Fluke Datapaq Food Tracker User Manual page 49

Specifying Oven Start
If you have not applied a process file, or if the process file you applied did not
specify that the oven start position be adjusted, you may want to adjust the
oven start position now: from the menu bar, select Process > Adjust Oven
Start, or use the right-click menu.
This can be valuable as it permits different paqfiles, i.e. data from different
temperature profile runs, to be compared with each other. If you do not wish
to adjust the oven start at this point, you may still do so at any time
subsequently.
For an explanation of oven start, and how to adjust it, click Help in
the Adjust Oven Start dialog.
Completing the Documentation
On the menu bar, select Edit > Notes to enter the operator's name and any
additional information you may wish to record about the profile run. This
will be saved with the paqfile and will also appear in your printed report
(select File > Print Options).
Information about the logger and the data-collection process for the paqfile
(including time/date, trigger mode and maximum internal logger temperature)
can be seen in the Paqfile Properties dialog (select File > Properties, or
right-click on the graph and select from the pop-up menu).
For further features of the Insight software – particularly data analysis and the use
of process files – see the online Help system (on Insight's menu bar,
select Help > Contents).
49
Running a Temperature Profile
FOOD TR ACK ER