Fluke Datapaq Food Tracker User Manual page 54

the run, the autosaved version of the data is displayed automatically when
Insight is next run, and you may then choose to save it as a paqfile.
When the run is complete, ensure that data received by Insight has been saved
as a paqfile. If you wish, you may download the data held in the logger
(p. 48), though it should normally be adequate simply to save, as a new
paqfile, the data already received.
Using Multiple Loggers
The use of multiple loggers, each attached to a separate USB port on the PC,
permits data to be gathered from a greater number of thermocouple channels
than can be achieved with a single logger. Up to three MultiPaq21 loggers can be
used simultaneously.
Use the Logger Reset Wizard to guide you step-by-step through the whole
process of multiple resets (click on the Insight toolbar, or select Tools >
Wizards from the menu). You must first enable the use of multiple loggers in
the Global Options dialog (select Tools > Options).
Data from multiple loggers used in a single profile run is displayed all together in
a single window by Insight. The data can be stored in a single paqfile, or as
individual paqfiles, each containing data from one of the loggers.
Insight's floating logger toolbar controls the display of data from each logger,
and allows data from any one logger to be saved as a separate paqfile. The
logger number – shown in the logger toolbar – allows duplicate probe numbers
from the multiple loggers to be separately identified in the Analysis Window and
probe toolbar, and in the probe key to the right of the graph.
The sort order of the duplicate probe numbers in the Analysis Window is
changed by the and buttons.
54
Hardwired Telemetry
FOOD TR ACK ER