Fluke Datapaq Food Tracker User Manual page 41

collect. The shorter the sample interval the better you will be able to record
short-term variations in your temperature regime – but the total recording
time available to you will be reduced, and the data will take longer to
download to the PC after the run. Restrictions apply to the sample intervals
allowed, depending on use of the humidity sensor.
The Reset dialog for the MultiPaq21 logger.
Probes Selected To conserve memory in the logger, click on the
relevant buttons to deselect those probes which will not be used. The
number of probes available and the logger memory size are dependent on
the logger used. Probe 1 must always be one of those selected. The humidity
probe (if used) is indicated by .
Data Transfer Select 'No Telemetry'. (To reset the logger for use with
hardwired telemetry, see p. 51.)
Memory Calculator Calculates the maximum time for which the logger
can collect data in each of the specified number of profile runs (see 'Multiple
Runs', below), given the sample interval, the number of probes and the
41
Running a Temperature Profile
FOOD TR ACK ER