Starter Solenoid Continuity Tests - Toro Z MASTER 2000 Series Service Manual

Starter Solenoid Installation (continued)

Starter Solenoid Continuity Tests

Electrical: Service and Repairs
g420414
3. Using a 1/2 inch socket, install the 2 (5/16 inch) nuts to secure the battery
positive and the battery positive starter cable to the starter solenoid.
g420412
4. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
g427670
Figure 127
Figure 128
Figure 129
Page 8–8 2000 Series Z MASTER®Service Manual
3460-328 Rev A