Toro Z MASTER 2000 Series Service Manual page 38

Engine Removal (continued)
Engine Installation
Engine: Service and Repairs
g420404
16. Remove the deck belt. Refer to
17. Remove the hydrostatic drive belt. Refer to
(page 7–10).
18. Remove the clutch. Refer to
19. Using a 9/16 inch socket, remove the 4 (3/8 inch) bolts securing the engine
to the chassis.
g420390
20. Using a proper lifting device, lift the engine up and out from the machine.
1. Using a proper lifting device, lower the engine down and into place.
Figure 15
Deck Belt Removal (page
Clutch Removal (page
Figure 16
Page 4–10
5–7).
Hydrostatic Drive Belt Removal
4–17).
2000 Series Z MASTER®Service Manual
3460-328 Rev A