Toro Z MASTER 2000 Series Service Manual page 63

Spindle Removal (continued)
Spindle Installation
2000 Series Z MASTER®Service Manual
3460-328 Rev A
g422386
1. Install the spindle assembly. Using a 1/2 inch socket, install the 6 (5/16 inch)
bolts to secure the spindle assembly to the deck. Torque to 16 ± 3 N•m
(12 ± 2 ft-lb).
g422386
2. Install the blade drive sheave. Using a 1-1/2 and 1-1/8 inch wrench, hold the
spindle shaft and install the (3/4 inch) nut to secure the blade drive sheave to
the spindle. Torque to 142 ± 7 N•m (105 ± 5 ft-lb).
Figure 54
Figure 55
Page 5–15 Deck: Service and Repairs