Engine Removal (continued)
2000 Series Z MASTER®Service Manual
3460-328 Rev A
6. Using a T40 torx driver, remove the 2 (5/16 inch) screws securing the upper
portion of the rear guard assembly. Remove the rear guard assembly.
g420408
7. Using a 1/4 inch socket, disconnect the 2 (#8) bolts securing the throttle and
choke cables to the engine.
g420419
8. Unhook the throttle and choke cables at the governor control plate assembly.
Figure 8
Figure 9
Page 4–7
Engine: Service and Repairs