Control Panel Removal (continued)
2000 Series Z MASTER®Service Manual
3460-328 Rev A
g421542
7. Disconnect the wire harness from the hourmeter.
g421541
8. Disconnect the wire harness from the USB power port.
g421559
9. Using a 1/4 inch socket, remove the 2 (#8) bolts securing the throttle and
choke cables to the engine.
10. Unhook the throttle and choke cables at the carburetor linkage.
Figure 132
Figure 133
Figure 134
Page 8–11
Electrical: Service and Repairs