Toro Z MASTER 2000 Series Service Manual page 107

Hydrostatic Drive Belt Removal (continued)
Hydrostatic Drive Belt Installation
2000 Series Z MASTER®Service Manual
3460-328 Rev A
g420402
1. Install the hydrostatic belt to the clutch.
2. Using a 1/2 inch breaker bar, rotate counter-clockwise to increase tension
on the spring.
g420403
3. Install the deck belt. Refer to
4. Lower the machine.
Figure 111
Figure 112
Deck Belt Installation (page
Page 7–11
5–9).
Drive: Service and Repairs