Clutch Installation (continued)
2000 Series Z MASTER®Service Manual
3460-328 Rev A
2. Using a 5/8 inch socket, install the (7/16 inch) clutch bolt to secure the clutch
to the engine. Torque to 75 ± 8 N•m (55 ± 6 ft-lb).
g420384
3. Secure the wire harness into the mounting clip. Connect the wire harness
to the clutch.
4. Install the hydrostatic drive belt. Refer to
(page
7–11).
5. Install the deck belt. Refer to
6. Lower the machine.
7. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
Figure 33
Hydrostatic Drive Belt Installation
Deck Belt Installation (page
Page 4–19
5–9).
Engine: Service and Repairs