Deleting A Special Sender - Ricoh Aficio 3045 Facsimile Reference Manual

Administrator Setting
D Make sure that [Vertical] is select-
ed.
E Enter the vertical size of the pa-
per using the number keys, and
then press [#].
Note
❒ You can specify a vertical size
from 210 mm (8.3") to 297 mm
(11.6"). You cannot enter a size
smaller than 210 mm or larger
than 297 mm.
❒ Each time you press [mm] or
[inch], the units switch be-
tween "mm" and "inch". If
you enter a length and change
the units by pressing [mm] or
[inch], it is converted auto-
matically (fractions are round-
ed off).
F Enter the horizontal size of the
9
paper using the number keys,
and then press [#].
180
Note
❒ You can specify a horizontal
size from 148 mm (5.9") to
600 mm (23.7"). You cannot
enter a size smaller than 148
mm or larger than 600 mm.
❒ Each time you press [mm] or
[inch], the units switch be-
tween "mm" and "inch". If
you enter a length and change
the units by pressing [mm] or
[inch], it is converted auto-
matically (fractions are round-
ed off).
G Press [OK].
G
Press [Exit].
H
Press the {User Tools/Counter} key.
The standby display appears.

Deleting a Special Sender

Use this function to program "Initial
Set Up" of a Special Sender. The By-
pass Tray Paper Size can also be spec-
ified.
A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Press [Administrator Tools].
D
Press [Program Special Sender].
E
Press [Delete], and then select the
Special Sender you want to delete.