Ricoh Aficio 3045 Facsimile Reference Manual page 224

Appendix
❒ The machine detects paper sizes in the following ways:
• When you place an original in the ADF, an original wider than about 264
mm (10.4") is scanned as A3, 11" 17" size.
An original narrower than about 230 mm (9.1") is sent as 8
1
8 / " 14" size, and an original narrower than about 264 mm (10.4") is
2
scanned as B4 JIS.
Originals up to 1200 mm (47.2") in length can be scanned.
• See the following table for sizes the machine can detect when you place an
original on the exposure glass. Because the machine scans custom size doc-
uments in a standard size, part of the image may be truncated depending
on the length of the document. For details about how to set custom size
documents, see p.17 "Setting a Scan Area", Facsimile Reference <Basic Fea-
tures>.
❖ Metric Version
-243 mm
243 mm-
268 mm
268 mm-
❖ Inch Version
9.6"-10.6"
10.6"-
- Unable to auto detect
*1
Normally a length of about 420 mm (16.5") can be scanned; however, it is only possi-
ble to specify a scanning size up to 432 mm (17").
❖ Maximum scan area
11
The following shows the maximum scan area:
• Memory Transmission: 297 1200 mm/11"
• Immediate Transmission: 297 1200 mm/11" 47" (W L) from the ADF
Note
❒ During Immediate Transmission, the length of the scanning range can
become narrower than 1200 mm (47"), depending on the character size
as well as the settings on the destination machine.
• 297 432 mm/11"
214
-249 mm
B5 JISK
A4K
-9.8"
-9.6"
1
11" 8 / "K
2
1
11" 8 / "K
2
17" (W
*1
Length
249 mm-274 mm 274 mm-316 mm
B5 JISL
B4 JISL B4 JISL
A3L
*1
Length
9.8"-10.8" 10.8"-12.4"
1
8 /
11" 17"L 11" 17"L
11" 17"L 11" 17"L
47" (W
L) (from the exposure glass)
1
/ " 11" or
2
316 mm-
A4L FL
B4 JISL
A3L A3L
12.4"-
FL
" 11"L
2
11" 17"L
11" 17"L
L) from the ADF