Reception Features
Reverse Order Printing
Normally, pages of the received doc-
ument are printed and stacked on the
tray in the order they are received. If
you turn this function on, the machine
will start printing the document from
the last page received.
5
Note
❒ You can turn this function on or off
using Reception Settings. See p.147
"Reception Settings".
❒ When this function is on, the first
page is printed last.
❒ This function uses Memory Reception.
102
Page Reduction
If you receive a document that is longer
than the paper in the tray, the ma-
chine usually prints it on two pages. If
you turn this function on, the ma-
chine reduces the width and length of
the received image so that it will fit on
one page. If A4L paper is loaded and
a document of B4 JISL size is re-
ceived, the machine will reduce the
document to a single A4L sheet.
Note
❒ You can turn this function on or off
with the User Parameters. See p.167
"User Parameters" (switch 10, bit 3).
❒ When this function is used, the printing
quality may not be as good as usual.
Reference
p . 1 0 1 " P a g e S e p a r a ti o n a n d
Length Reduction"