Ricoh Aficio 3045 Facsimile Reference Manual page 25

A
Press [Transmission Mode].
B
Press [Polling RX].
C
Depending on which method you
are using, select one of the follow-
ing procedures:
Default ID/Free Polling Reception
A Check that [Default ID / Free Poll-
ing RX] is selected, and then
press [OK].
Note
❒ To cancel Polling Reception,
press [Cancel]. The display
returns to that of step
ID Override Polling Reception
A Select [ID Override Polling Recep-
tion].
B Specify a 4-digit ID using the
number keys and [A], [B], [C],
[D], [E], and [F], and then press
[OK].
"ID Override: " and the entered
Polling ID are shown above the
highlighted [Polling RX].
Note
❒ A Polling ID may be any four
numbers (0 to 9) and charac-
ters (A to F), except 0000 and
FFFF.
❒ If you make a mistake, press
[Clear] or the {Clear/Stop} key
before pressing [OK], and
then try again.
❒ To cancel Polling Reception,
press [Cancel]. The display
returns to that of step
D
B
.
Press [OK].
The standby display appears.
E
Specify the destination, and then
press the {Start} key.
Polling Reception
1
B
.
15