Poe Configuration - Planet HPOE-1200G User Manual

4.5.1 PoE Configuration

This section provides PoE (Power over Ethernet) Configuration and PoE output status of PoE Injector Hub; screen in
Figure 4-5-2 appears. Table 4-5-2
Object
 System PoE Admin Mode
 Power Supply
 POE Temperature Unit 1
 POE Temperature Unit 2
 Power Limit Mode
 Over Temperature
Protection
User's Manual of POE-1200G / POE-2400G / HPOE-1200G / HPOE-2400G
describes the PoE Configuration object of PoE Injector Hub.
Figure 4-5-2: PoE Configuration Web Page Screen
Description
Allows user to disable / enable PoE function.
Displays PoE power supply status.
Displays the current operating temperature of PoE chip unit 1.
Displays the current operating temperature of PoE chip unit 2.
Allows user to configure power limit mode, which can be chosen.
Consumption: Based on the real device power consumption where PoE power is
delivered as system default setting is in this mode.
Classification: Based on port priority setting and device class where PoE power is
delivered.
Prevent system from being too hot that may cause damage. When PoE unit
temperature rises over the temperature threshold value, PoE power budget will be
reduced.
Please refer to the table below for knowing the OTP level:
43