Appendix C: Post Code Errors; Table 35. Post Error Messages And Handling - Intel SR2612UR Product Specification

Appendix C: POST Code Errors

Whenever possible, the BIOS outputs the current boot progress codes on the video screen.
Progress codes are 32-bit quantities plus optional data. The 32-bit numbers include class,
subclass, and operation information. The class and subclass fields point to the type of hardware
being initialized. The operation field represents the specific initialization activity. Based on the
data bit availability to display progress codes, you can customize a progress code to fit the data
width. The higher the data bit, the higher the granularity of information that can be sent on the
progress port. The progress codes may be reported by the system BIOS or option ROMs.
The Response section in the following table is divided into three types:

No Pause: The message is displayed on the screen during POST or in the Error
Manager. The system continues booting with a degraded state. The user may want to
replace the erroneous unit. The setup POST error Pause setting does not have any
effect with this error.

Pause: The message is displayed on the Error Manager screen, and an error is logged
to the SEL. The setup POST error Pause setting determines whether the system pauses
to the Error Manager for this type of error, where the user can take immediate corrective
action or choose to continue booting.

Halt: The message is displayed on the Error Manager screen, an error is logged to the
SEL, and the system cannot boot unless the error is resolved. The user needs to
replace the faulty part and restart the system. The setup POST error Pause setting does
not have any effect with this error.
Error Code
0012 CMOS date / time not set
0048 Password check failed
0108 Keyboard component encountered a locked error.
0109 Keyboard component encountered a stuck key error.
Fixed Media The SAS RAID firmware cannot run properly. The user should attempt to
0113
reflash the firmware.
0140 PCI component encountered a PERR error.
0141 PCI resource conflict
0146 PCI out of resources error
0192 L3 cache size mismatch
0194 CPUID, processor family are different
0195 Front side bus mismatch
0196 Processor Model mismatch
0197 Processor speeds mismatched
0198 Processor family is unsupported.
019F Processor and chipset stepping configuration is unsupported.
5220 CMOS/NVRAM Configuration Cleared
5221 Passwords cleared by jumper
5224 Password clear Jumper is Set.
8110 Processor 01 internal error (IERR) on last boot
8111 Processor 02 internal error (IERR) on last boot
8120 Processor 01 thermal trip error on last boot
8121 Processor 02 thermal trip error on last boot
8130 Processor 01 disabled
8131 Processor 02 disabled
66
Appendix C: POST Code Errors

Table 35. POST Error Messages and Handling

Error Message
Intel order number E76293-003
Intel® Server System SR2612UR TPS
Pause
Halt
No Pause
No Pause
Pause
Pause
Pause
Pause
Halt
Halt
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Response
Revision 1.3