Cleaning; Cleaning The Power Cable Plug - Ricoh GelSprinter GX e5550n User Manual

6. Maintaining

Cleaning

Clean the outside of the printer regularly to maintain the condition of the printer.
• To avoid hazardous electric shock, do not remove any covers or screws other than those specified
in this manual. When the machine needs to be checked, adjusted, or repaired, contact your service
representative.
• Do not take apart or attempt any modifications to this machine. There is a risk of fire, electric shock,
explosion or loss of sight.
To clean the exterior of the printer, wipe it with a soft, dry or damp cloth. If the dirt does not come off, wipe
the printer first with a cloth moistened with a neutral detergent, then with a damp cloth, and finally with a
dry cloth.
• Do not use volatile chemicals like benzene or thinner, or insecticides on the printer. Using these
6
chemicals could deform, crack, or change the color of the printer.
• When wiping the printer with a cloth moistened with detergent, be sure to wipe only the exterior.

Cleaning the power Cable Plug

• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the
prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
200