Table of Contents
Advertisement
• Install SmartDeviceMonitor for Client before installing the printer driver when using the
SmartDeviceMonitor for Client port.
You can install SmartDeviceMonitor for Client in either of the following two ways:
Full install
Installs all modules.
Custom Install
You can select which modules to install.
This section explains the procedure for Full install.
1.
Start Windows, and then insert the provided CD-ROM into the CD-ROM drive.
Quit all applications currently running.
2.
Select an interface language, and then click [OK].
3.
Click [DeskTopBinder - SmartDeviceMonitor for Client].
4.
Select the language to be used for installation, and then click [Next >].
5.
Click [Next >].
6.
The software license agreement appears in the [<License Agreement>] dialog box. After
reading through its contents, click [Yes] to accept it.
7.
Click [Full install].
8.
Select the folder in which you want to install the files, and then click [Next >].
9.
Register the Program folder.
10.
Click [Next >].
11.
Check the specified setting, and then click [Next >].
12.
Click [Complete].
If you are required to restart the computer after installing SmartDeviceMonitor for Client, restart the
computer.
• After inserting the CD-ROM, the [Printer Drivers, Manuals, Utilities] dialog box appears. If it does not,
double-click the CD-ROM drive icon under [My Computer] or [Explorer], and then double-click
[Setup.exe].
Installing the Drivers for Network Connection
2
83
Advertisement
Table of Contents
Troubleshooting
