Ricoh GelSprinter GX e5550n User Manual page 247

Some characters are garbled or missing.
• In the [Change User Settings] dialog box, on the [Misc.] tab, select the [Change methods to extract
TrueType fonts] check box.
• In the [Printer Configuration] tab, set [Spool format:] to [EMF]. In the [Change User Settings] dialog
box, on the [Misc.] tab, select the [Print as bitmap] check box.
Some characters are printed faintly or not printed.
• In the [Print Quality] area, select [Quality priority], and then print.
• In the [Change User Settings] dialog box, on the [Image Adjustments] tab, under [Dithering], deselect
the [Use error diffusion] check box.
• On the [Printer Configuration] tab, set [Spool format:] to [RAW] or [EMF].
• On the [Printer Configuration] tab, select the [Increase bold with font size] check box.
• In the [Print Quality-User settings] dialog box, on the [Color Settings] tab, specify [Gray reproduction
(Text/Line Art):].
• To print text in black, in the [Print Quality-User settings] dialog box, on the [Color Settings] tab, select
the [K (Black) for text only] check box.
Printing is slow and takes time, which delays release of the application.
• In the [Print Quality] area, select [Speed priority] or [High speed], and then print.
• In the [Printer Configuration] tab, set [Spool format:] to [EMF].
• In the [Change User Settings] dialog box, on the [Image Adjustments] tab, under [Image processing
priority], deselect the [Adjust photos and images] and [Smooth low resolution images] check boxes.
• Close the resident application.
Printing stops halfway.
View the status monitor to check whether an error has occurred. See p.254 "Status Monitor Errors".
To print on pre-printed or pre-punched paper, select the [Use preprinted/prepunched paper] check box
in the [Printer Configuration] tab.
Cannot carry out Layout print for Excel sheets.
In the printer properties dialog box, on the [Advanced Options] tab, select the [Increase auto-keep settings
for applications] check box.
How can I make the Print mode change automatically according to the status of envelope
selector?
To automatically do single-sided printing when the envelope selector is set to the envelope position, on the
[Printer Configuration] tab, select the [When the envelope selector is set to Envelope Mode, use uni-
directional printing only] check box.
Print Results Are Not Satisfactory
7
245