Table of Contents
Advertisement
4. Monitoring and Configuring the Printer
Specifying the Client Computer Settings
Follow the procedure below to make the settings on the client.
1.
On the [Start] menu, point to [All Programs], point to [DeskTopBinder],
[SmartDeviceMonitor for Client], and then click [Extended Features Settings].
The Extended Features Settings dialog box opens.
2.
Select the [Use Extended Features] check box.
3.
Select the [Notify of printout/data-transmission when using print server] check box in
"Notification".
4.
Click [OK].
4
The Extended Features dialog box closes.
Specifying the client computer settings is now complete.
Specifying the Settings for Monitoring the Printer
Use SmartDeviceMonitor for Client to monitor the status of the printer.
To use SmartDeviceMonitor for Client, you must make the following settings:
1.
Launch SmartDeviceMonitor for Client.
The SmartDeviceMonitor for Client icon appears in the taskbar's system tray.
This will not appear if you click [Do not show this message again].
2.
Right-click the SmartDeviceMonitor for Client icon, and then, in the pop-up menu, look for
the printer you want to monitor.
3.
If the printer you want to monitor does not appear, point to [Properties], and then click
[Monitor Device Settings...].
The SmartDeviceMonitor for Client - Option dialog box opens.
4.
Select the printer you want to monitor, and then select the [To be Monitored] check box in
[Printer Settings].
If you select the [Display on the task bar menu] check box, you can reflect the printer status in the
SmartDeviceMonitor for Client icon in the taskbar system tray.
5.
Click [OK].
The SmartDeviceMonitor for Client - Settings dialog box closes and the selected printer is monitored.
• For details about how the icon indicates the printer status, see the SmartDeviceMonitor for Client Help.
• If you are using the printer in a DHCP environment, see p.290 "Using DHCP".
112
Advertisement
Table of Contents
Troubleshooting
