Ricoh GelSprinter GX e5550n User Manual page 25

4. [ Online] key
Indicates whether the printer is online or offline. Press this to switch between online and offline.
When the lamp is lit, the printer is online, enabling data reception from the host computer.
When the lamp is unlit, the printer is offline, disabling data reception from the host computer.
Press to return to the ready condition.
5. [Form Feed] key
When the printer is offline, press this to print all data left in the printer's input buffer.
You can use this to force the printer to print data received in the online status when the paper size or type does
not match the actually set size or type.
If a message prompting you to remove the jammed paper by pressing the [Form Feed] key appears, press this
key.
6. [Job Reset] key
When the printer is online, press this key to cancel an ongoing print job.
7. Alert indicator
Lights up whenever a printer error occurs. A red light indicates an error has occurred that makes printing
impossible; blinks red to indicate a possible error during printing.
If the red light is on, follow the instructions that appear on the display.
8. [ ][ ] keys
Use these keys to increase or decrease values on the display when making settings.
Keep the key pressed to quicken scrolling, and increase or decrease values on the display in units of 10.
To apply this function: under [Maintenance], set [Key Repeat] to [On].
When the printer is online and the "Ready" message is displayed on the control panel, press the [ ] key to clean
the cyan, magenta, yellow, and black print heads (
9. [#Enter] key
Press this key to execute menu items selected on the display.
10. [Escape] key
Press this key to return to the previous condition on the display.
11. [Power] key
• Press to turn the power on and off.
• To turn the power on, press and hold down the [Power] key for one second until it lights.
• After the power is turned on, the [Power] key will flash until the printer is ready for printing, at which point
the key will stop flashing and remain lit.
• When the power is turned off, the key will blink slowly until the printer has completely shut down at which
point the key will be dark.
• means "standby". To avoid any power consumption, disconnect the power plug from the wall outlet.
12. Data In indicator
Blinks when the printer is receiving data from a computer or when the printer is carrying out maintenance. The
Data In indicator is lit if there is data to be printed.
only).
Guide to Components
1
23