All Register - Polycom VSX3000 Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

all register

4 - 12
Registers for most commonly-used user registration events.
Syntax
all register
Feedback Examples
all register
might return
callstate registered
camera registered
linestate registered
mute registered
pip registered
popupinfo registered
preset registered
screen registered
vcbutton registered
volume registered
sleep registered
Comments
Registers changes to any of the following types of parameters:
• Current near-site or far-site source
• State of privacy
• Current volume level
• Active camera presets
• Status of point-to-point or multipoint calls
• Status of physical ISDN/IP connection to codec
• PIP state
Visual Concert state
•
Chair control
•
System information
•
• Gatekeeper status
This command is particularly useful when two different control systems are
being used simultaneously, such as the web and API commands. The system
maintains the registration changes through restarts.
To register for events not included in this feedback, refer to the specific
registration command.