Powercam/Visca Control Cable (Vsx 7000E Or Vsx 8000) - Polycom VSX3000 Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

PowerCam/VISCA Control Cable (VSX 7000e or VSX 8000)

Description
8-pin mini-DIN to DB-15
8-pin mini-DIN to DB-9
P1
15 Pin D-sub
Male
2 - 18
This cable connects a VSX 7000e or VSX 8000 to Non-Polycom camera using a
VISCA 8-pin DIN connector, or to a Polycom PowerCam break-out cable with
a PowerCam camera.
The 8-pin mini-DIN to DB-15 cable is not qualified and should not be used. As
stated below, this information is provided for your reference only and
Polycom claims no responsibility or liability for the use of this information.
Instead, Polycom recommends the 8-pin mini-DIN to DB-9 on this page and
the DB-15 to DB-9 adapter on 2-20, which is included with the VSX 8000
system.
Used With Part Number
VSX 7000e or 1457-50527-001
VSX 8000 main
camera input
VSX 7000e or 2457-10029-001
VSX 8000 (RTS/CTS not
secondary supported on this
camera input on cable)
serial port
8-pin mini-DIN to DB-15
P1 15 Pin D Connector
Pin # Signal Name
1-6, 9-11, 13 NC
7 SW-RX/SN-TX
8 IR-SIGNAL
12 P GND
14 SW-TX/SN-RX
15 IR RETURN
SHIELD
Drawings and part numbers are provided for reference only. Polycom claims no responsibility
or liability for the quality, performance, or reliability of cables based on these reference
drawings, other than cables provided by Polycom. Contact your Polycom distributor or
Polycom Custom/Vertical Products to order cables that meet the appropriate manufacturing
tolerances, quality, and performance parameters for your application.
Length
Shipped Length:
50 ft (15 m)
Shipped Length:
50 ft (15 m)
50' ± 3.0"
P2 VISCA 8 Pin mini Din
Pin # Signal Name
1, 2, 8 NC
3 SW-RX/SN-TX
7 IR OUT
4 GND
5 SW-TX/SN-RX
6 GND
SHIELD
Other Cables
Available
1457-50527-100
100 ft (30 m)
2457-21259-001
100 ft (30 m)
P2 8 Pin Mini Din
Male