autoanswer
Sets or gets the Auto Answer Point to Point mode, which determines how the
system will handle an incoming call in a point-to-point video conference.
Syntax
autoanswer <get|yes|no|donotdisturb>
Parameter
yes
no
donotdisturb
get
Feedback Examples
•
autoanswer donotdisturb
•
autoanswer no
•
autoanswer yes
Comments
User interface screen location: System > Admin Settings > General Settings
> System Settings > Call Settings: Auto Answer Point to Point
If
is set to
autoanswer
no
notifications to answer inbound calls.
Description
Allows any incoming call to be connected
automatically. This is the default setting.
Prompts the user to answer incoming calls.
Notifies the user of incoming calls, but does not
connect the call. The site that placed the call receives a
Far Site Busy (H.320) or Call Rejected (H.323) code.
Returns the current setting.
or
, you must rely on API session
donotdisturb
System Commands
4 - 25