Rs232 Mode - Polycom VSX3000 Integrator's Reference Manual

rs232 mode

Sets or gets the operational mode of the first RS-232 port. For systems with two
serial ports, use
rs232port1 mode
Syntax
rs232 mode <get|passthru|control|debug|sony_ptz|closed_caption|
vortex_mixer|cps|interactive_touch_board|polycom_annotation|smartboa
rd|pointmaker>
rs232port1 mode <get|passthru|control|debug|sony_ptz|closed_caption|
vortex_mixer|cps|interactive_touch_board|polycom_annotation|smartboa
rd|pointmaker>
Parameter
get
passthru
contol
debug
sony_ptz
closed_caption
vortex_mixer
cps|interactive_touc
h_board|polycom_anno
tation|smartboard|
pointmaker
rs232port1
Feedback Examples
• rs232 mode control
• rs232 mode debug
Comments
User interface screen location: System > Admin Settings > General Settings
> Serial Port: RS-232 Mode
to set the mode for the second serial port.
Description
Returns the current mode setting.
Sets the RS-232 port to Pass Thru mode.
Sets the RS-232 port to Control mode.
Sets the RS-232 port to Debug mode.
Sets the RS-232 port to Sony PTZ mode.
Sets the RS-232 port to Closed Caption mode.
Sets the RS-232 port to Vortex Mixer mode.
Reserved for future applications.
Specifies serial port 2 on systems with two ports.
System Commands
4 - 223