Webport - Polycom VSX3000 Integrator's Reference Manual

webport

Sets or gets the port to use when accessing the system using VSX Web.
Syntax
webport get
webport set "port"
Parameter
get
set
Feedback Examples
webport set 80
returns
webaccessport 80
restart system for changes to take effect.
Comments
If you change this from the default (port 80), you will need to include the port
number with the IP address when you use VSX Web to access the system. This
makes unauthorized access more difficult. After making a change, you are
prompted to restart the system.
User interface screen location: System > Admin Settings > General Settings
> Security (page 2): Web Access Port
Description
Returns the current setting.
Sets the web access port to "port".
restart now? <y,n>
System Commands
4 - 295