Ipdialspeed - Polycom VSX3000 Integrator's Reference Manual

ipdialspeed

Sets or gets the valid IP dialing speed, and enables or disables the specified
speed.
Syntax
ipdialspeed get "valid speed"
ipdialspeed set "valid speed" <on|off>
Parameter
get
"valid speed"
set
on
off
Feedback Examples
ipdialspeed get 168
returns
ipdialspeed 168 off (if the specified speed is disabled)
ipdialspeed 168 on (if the specified speed is enabled)
Comments
User interface screen location: System > Admin Settings > Network > Call
Preference (page 3): Preferred Speeds
Description
Returns the current setting. The parameter "valid
speed" is required.
Valid speeds are: 56, 64, 2x56, 112, 2x64, 128, 168,
192, 224, 256, 280, 320, 33 6, 384, 392, 7x64, 8x56,
504, 512, 560, 576, 616, 640, 672, 704, 728, 768, 784,
832, 840, 16x56, 14x64, 952, 960, 1008, 1024, 1064,
1088, 1120, 1152, 1176, 1216, 1232, 1280, 1288,
24x56, 21x64, 1400, 1408, 1456, 1472, 1512, 1536,
1568, 1600, 1624, 1664, 1680, 1728, 1736, 32x56,
28x64, 1848, 1856, 1904, and 1920 kbps.
Sets the IP dialing speed. The parameters "valid
speed" and on or off are required.
Enables the specified speed.
Disables the specified speed.
System Commands
4 - 141