Mpautoanswer - Polycom VSX3000 Integrator's Reference Manual

mpautoanswer

Sets or gets the Auto Answer Multipoint mode, which determines how the
system will handle an incoming call in a multipoint video conference.
Syntax
mpautoanswer <get|yes|no|donotdisturb>
Parameter
get
yes
no
donotdisturb
Feedback Examples
• mpautoanswer donotdisturb
• mpautoanswer no
• mpautoanswer yes
Comments
If is set to
mpautoanswer
notifications to answer inbound calls.
User interface screen location: System > Admin Settings > General Settings
> System Settings > Call Settings: Auto Answer Multipoint or
System > User Settings: Auto Answer Multipoint
Description
Returns the current setting.
Connects incoming calls automatically. The screen will
split into a multipoint call progress screen as the
incoming call is answered.
For an incoming call, the user will be notified and given
the choice to answer the call. If the user selects Yes,
the call is added to the ongoing conference. If the user
selects No, the call is rejected. The default is No.
The user is not notified of incoming calls. The sites that
placed the calls receive a Far Site Busy (H.320) or Call
Rejected (H.323) code.
or , you must rely on API session
no donotdisturb
System Commands
4 - 169