Streamvideoport - Polycom VSX3000 Integrator's Reference Manual

streamvideoport

Sets or gets the stream video port.
Syntax
streamvideoport get
streamvideoport set ["video port"]
Parameter
get
set
"video port"
Feedback Examples
streamvideoport set 16386
returns
streamvideoport 16386
Comments
By default, the video port is a fixed port. This command lets you change
stream video port to go through a firewall.
User interface screen location: System > Admin Settings > Network > IP >
Streaming: Video Port
Description
Returns the current setting.
Sets the stream video port when followed by the
"video port" parameter. To erase the current
setting, omit the parameter.
Video port number.
System Commands
4 - 255