Monitor2Screensaverouput - Polycom VSX3000 Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

monitor2screensaverouput

4 - 168
Sets or gets whether to send either black video or "No Signal" to Monitor 2
when the screen saver activates.
Syntax
monitor2screensaveroutput <get|black|no_signal>
Parameter
black
no_signal
get
Feedback Examples
The command
monitor2screensaverouput black
returns
monitor2screensaverouput black
The command
monitor2screensaverouput get
returns
monitor2screensaverouput black
Comments
User interface screen location: System > Admin Settings > Monitors >
Monitors
Command History
Introduced in version 8.5.
See Also
See the
monitor1screensaverouput
Description
Sends black video to Monitor 2 when the system goes
to sleep and the screen saver activates.
Sends no signal to Monitor 2 when the system goes to
sleep and the screen saver activates.
Returns the current setting.
command on page 4-166.