Power-Adapter Port; Removing The Power-Adapter Port - Dell Precision 7680 Service Manual

Steps
1.
NOTE: Before installing the display assembly, ensure that the display hinges are opened to a 90-degree angle against
the display assembly, to fit the display assembly to the palm rest.
Align the screw holes on the hinges on the display assembly to the screw holes on the palm rest.
2. Replace the six (M2.5x3) screws to secure the hinges to the palm rest.
Next steps
1. Install the inner frame.
2. Install the heat-sink for integrated graphics
3. Install the secondary solid-state
4. Install the primary solid-state
5. Install the interposer board
6. Install the CAMM module
7. Install the battery.
8. Install the SIM card.
9. Install the base cover.
10. Follow the procedure in

Power-adapter port

Removing the power-adapter port

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the SIM card.
4. Remove the battery.
or heat-sink for discrete
drive.
drive.
module.
or long CAMM module or
after working inside your
before working inside your
graphics.
memory module.
computer.
computer.
Removing and installing components 77