Power Button; Removing The Power Button - Dell Precision 7680 Service Manual

Steps
1. Connect the power button board FFC to the power button board.
2. Align and place the power button board with the power button FFC into its slot on the computer.
3. Replace the (M2x3) screw to secure the power button board to the computer.
4. Adhere the power button board FFC to the system chassis.
5. Connect the power button board FFC to the connector on the system board.
Next steps
1. Install the heat-sink for integrated graphics
2. Install the base cover.
3. Follow the procedure in

Power button

Removing the power button

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the heat-sink for integrated graphics
4. Remove the power button
About this task
The figure indicates the location of the power button and provides a visual representation of the removal procedure.
56 Removing and installing components
or heat-sink for discrete
after working inside your
before working inside your
or heat-sink for discrete
board.
graphics.
computer.
computer.
graphics.