Installing The Coin-Cell Battery - Dell Precision 7680 Service Manual

Installing the coin-cell battery

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the coin-cell battery and provides a visual representation of the installation procedure.
Steps
Adhere the coin-cell battery to the palmrest.
Next steps
1. Install the system board.
2. Install the inner frame.
3. Install the heat-sink for integrated graphics
4. Install the secondary solid-state
5. Install the primary solid-state
6. Install the interposer board
7. Install the CAMM module
8. Install the battery.
9. Install the SIM card.
10. Install the base cover.
11. Follow the procedure in
or heat-sink for discrete
drive.
drive.
module.
or long CAMM module or
after working inside your
graphics.
memory module.
computer.
Removing and installing components 73