Steps
1. Adhere the SD card reader FPC into its slot on the computer chassis.
2. Connect the SD card reader FPC to its connectors on the SD card reader and system board.
Next steps
1. Install the
inner
frame.
2. Install the
long CAMM
NOTE:
For models shipped with long CAMM module.
3. Install the battery.
4. Install the
secondary solid-state
5. Install the
primary solid-state
6. Install the
base
cover.
7. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
SIM
card.
4. Remove the battery.
5. Remove the
CAMM module
6. Remove the
interposer board
7. Remove the
WLAN
card.
8. Remove the
WWAN
card.
9. Remove the
primary solid-state
10. Remove the
secondary solid-state
11. Remove the
heat-sink for integrated graphics
module.
drive.
drive.
after working inside your
before working inside your
or
long CAMM module
module.
drive.
drive.
or
computer.
computer.
or
memory
module.
heat-sink for discrete
graphics.
Removing and installing components
65