Coin-Cell Battery; Removing The Coin-Cell Battery - Dell Precision 7680 Service Manual

9. Install the battery.
10. Install the SIM card.
11. Install the base cover.
12. Follow the procedure in

Coin-cell battery

Removing the coin-cell battery

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the SIM card.
4. Remove the battery.
5. Remove the CAMM module
6. Remove the interposer board
7. Remove the primary solid-state
8. Remove the secondary solid-state
9. Remove the heat-sink for integrated graphics
10. Remove the inner frame.
11. Remove the system board.
About this task
The figure indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.
Steps
Pry to remove the coin-cell battery, which is located under the system board, from the palmrest while lifting the system board.
72 Removing and installing components
after working inside your
before working inside your
or long CAMM module
module.
drive.
drive.
or heat-sink for discrete
computer.
computer.
or memory module.
graphics.