Speakers; Removing The Speakers - Dell Precision 7680 Service Manual

Steps
1. Align and place the power button into its slot on the computer.
2. Replace the two (M2x3) screws to secure the power button in place.
Next steps
1. Install the power button
2. Install the heat-sink for integrated graphics
3. Install the base cover.
4. Follow the procedure in

Speakers

Removing the speakers

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the primary solid-state
4. Remove the secondary solid-state
5. Remove the battery.
About this task
The figure indicates the location of the speakers and provides a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the system board.
2. Unroute the speaker cable from the routing threads on the inner frame.
3. Pry the speaker module from its slot on the top edge of the palm rest.
4. Remove the speaker module from the system chassis.
58 Removing and installing components
board.
or heat-sink for discrete
after working inside your
before working inside your
drive.
drive.
graphics.
computer.
computer.