Dell Precision 7680 Service Manual page 29

About this task
NOTE: For models shipped with a CAMM module
The figure indicates the location of the CAMM module and provides a visual representation of the installation procedure.
Steps
1. Place the CAMM connecter module and the CAMM module into its slot on the system board.
CAUTION: When handling the memory connector DO NOT touch the pins on the connector module, the pins
are fragile and any direct contact with the pins may damage them. Only hold the connector from the sides to
avoid contact with the pins.
2. Replace the two (M2x3.5) screws to secure the CAMM module to the system board.
3. Place the memory bracket and replace the two (M2x6) screws to secure it to the CAMM module.
Next steps
1. Install the base cover.
Removing and installing components 29