Installing The Gpu Card - Dell Precision 7680 Service Manual

Steps
1. Carefully pry up the outside-end of the GPU power cable connector head to unlock the GPU power cable connector from
the GPU card.
2. Slightly slide the GPU power cable connector outwards to disconnect the GPU power cable from the GPU card.
3. Remove the four (M2x6) screws that secure the PCB beam connectors on the system board.
4. Lift to remove the PCB beam connectors from the system board.
5. Remove the three (M2x5) screws that secure the GPU card to the system chassis.
6. Remove the GPU card from the computer.

Installing the GPU card

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the GPU card and provides a visual representation of the installation procedure.
Removing and installing components 51