Palm Rest; Removing The Palm Rest - Dell Precision 7680 Service Manual
Hide thumbs
Also See for Precision 7680:
- Setup and specifications (32 pages) ,
- Connection manual (11 pages)
Table of Contents
Advertisement
5. Lift the latch and connect the keyboard FPC and the keyboard backlight FPC to their connectors on the touchpad module.
NOTE:
For models shipped with a keyboard backlight.
Next steps
1. Install the
system
board.
2. Install the
inner
frame.
3. Install the
heat-sink for integrated graphics
4. Install the
secondary solid-state
5. Install the
primary solid-state
6. Install the
interposer board
7. Install the
CAMM module
8. Install the battery.
9. Install the
SIM
card.
10. Install the
base
cover.
11. Follow the procedure in
Palm rest
Removing the palm rest
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
SIM
card.
4. Remove the battery.
5. Remove the
CAMM module
6. Remove the
interposer board
7. Remove the
primary solid-state
8. Remove the
secondary solid-state
9. Remove the
heat-sink for integrated graphics
10. Remove the
GPU
card.
11. Remove the
GPU power
12. Remove the
power-button
13. Remove the power-button.
14. Remove the speakers.
15. Remove the
inner
frame.
16. Remove the
SD card
reader.
17. Remove the
system
board.
18. Remove the
coin-cell
19. Remove the
display
assembly.
20. Remove the
power-adapter
21. Remove the
smart card
22. Remove the keyboard.
About this task
The figure below shows the palm rest after performing the pre-removal parts procedures for any palm rest replacement.
86
Removing and installing components
or
heat-sink for discrete
drive.
drive.
module.
or
long CAMM module
after working inside your
before working inside your
or
long CAMM module
module.
drive.
drive.
or
cable.
board.
battery.
port.
reader.
graphics.
or
memory
module.
computer.
computer.
or
memory
module.
heat-sink for discrete
graphics.
Advertisement
Table of Contents
