Power Button Board; Removing The Power Button Board - Dell Precision 7680 Service Manual

Steps
1. Adhere the GPU power cable into its slot on the computer.
2. Connect the GPU power cable from the connector on the system board.
3. Slide the GPU power cable connector into its slot to connect the GPU power cable to the GPU card.
4. Lock the GPU power cable connector to secure the GPU card.
Next steps
1. Install the heat-sink for discrete
2. Install the base cover.
3. Follow the procedure in

Power button board

Removing the power button board

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the heat-sink for integrated graphics
About this task
The figure indicates the location of the power button board and provides a visual representation of the removal procedure.
54 Removing and installing components
graphics.
after working inside your
before working inside your
or heat-sink for discrete
computer.
computer.
graphics.