Sd Card Reader Fpc; Removing Sd Card Reader Fpc - Dell Precision 7680 Service Manual

Steps
1. Align and place the SD card reader with the FPC into its slot on the computer chassis.
2. Replace the (M2x2) screw to secure the SD card reader to the computer chassis.
3. Connect the LED board FFC and SD card reader FPC to the SD card reader.
Next steps
1. Install the inner frame.
2. Install the long CAMM
NOTE: For models shipped with long CAMM module.
3. Install the battery.
4. Install the secondary solid-state
5. Install the primary solid-state
6. Install the base cover.
7. Follow the procedure in

SD card reader FPC

Removing SD card reader FPC

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the primary solid-state
4. Remove the secondary solid-state
5. Remove the battery.
6. Remove the long CAMM
NOTE: For models shipped with long CAMM module.
7. Remove the inner frame.
About this task
The figure indicates the location of the SD card reader FPC and provides a visual representation of the removal procedure.
module.
drive.
drive.
after working inside your
before working inside your
drive.
drive.
module.
computer.
computer.
Removing and installing components 63