Smart-Card Reader; Removing The Smart-Card Reader - Dell Precision 7680 Service Manual

Steps
1. Connect the power-adapter cable to the connector on the system board.
2. Place the power-adapter port bracket on the power-adapter port.
3. Replace the (M2x3) screw to secure the power-adapter port bracket to the computer.
4. Adhere and route the power-adapter cable using the routing guides on the computer chassis.
Next steps
1. Install the system board.
2. Install the inner frame.
3. Install the heat-sink for integrated graphics
4. Install the secondary solid-state
5. Install the primary solid-state
6. Install the interposer board
7. Install the CAMM module
8. Install the battery.
9. Install the SIM card.
10. Install the base cover.
11. Follow the procedure in

Smart-card reader

Removing the smart-card reader

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the SIM card.
4. Remove the battery.
5. Remove the CAMM module
6. Remove the interposer board
7. Remove the primary solid-state
8. Remove the secondary solid-state
or heat-sink for discrete
drive.
drive.
module.
or long CAMM module or
after working inside your
before working inside your
or long CAMM module
module.
drive.
drive.
graphics.
memory module.
computer.
computer.
or memory module.
Removing and installing components 79