Steps
1. Align and insert the heat sink into its slot on the computer.
2. Tighten the eight captive screws to secure the heat sink to the system board.
NOTE:
Tighten the captive screws in the order that is stamped onto the heat sink next to the screws [1 > 2 > 3 > 4 > 5
> 6 > 7 > 8].
3. Replace the four (M2x5) screws to secure the fans to the system chassis.
4. Connect the two fan cables to their connectors on the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
GPU card
Removing the GPU card
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
heat-sink for discrete
About this task
The figure indicates the location of the GPU card and provides a visual representation of the removal procedure.
50
Removing and installing components
After working inside your
before working inside your
graphics.
computer.
computer.