Gpu Power Cable; Removing The Gpu Power Cable - Dell Precision 7680 Service Manual

Steps
1. Align and place the GPU card into its slot on the system chassis.
2. Replace the three (M2x5) screws to secure the GPU card to the system chassis.
3. Align and place the PCB beam connectors on the system board.
NOTE: When installing an FPC beam connector, ensure that the end marked "MB" is connected to the system board
and that the alignment pins on the connector are inserted into the openings on the boards.
4. Replace the four (M2x6) screws that secure the PCB beam connectors on the system board.
5. Slide the GPU power cable connector into its slot to connect the GPU power cable to the GPU card.
6. Lock the GPU power cable connector to secure the GPU card.
Next steps
1. Install the heat-sink for discrete
2. Install the base cover.
3. Follow the procedure in

GPU power cable

Removing the GPU power cable

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the heat-sink for discrete
About this task
The figure indicates the location of the GPU power cable and provides a visual representation of the removal procedure.
52 Removing and installing components
graphics.
after working inside your
before working inside your
graphics.
computer.
computer.