a.
Batteries
b.
Bottom Chassis Cover
3. Follow the procedure in
Coin-cell battery
Removing the Coin cell
1. Follow the procedure in
2. Remove the:
a.
Bottom chassis cover
b.
Batteries
3.
NOTE:
Removing or Disconnecting the coin cell may reset systemboard / BIOS / system time to defaults or engage bit
locker or other similar security protocol devices.
Disconnect the coin cell connector from the system board [1] and remove it from the system [2].
Installing the Coin cell
1. Install the coin cell [1] and connect the coin cell connector to the system board [2].
82
Removing and installing components
After working inside your
Before working inside your
computer.
computer.