Table of Contents
Advertisement
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
3. If you are installing memory modules on the processor and memory expansion tray, do not remove the
expansion tray. Only remove the air baffle that is installed on the expansion tray.
Figure 78. Air baffle removal from the processor and memory expansion tray
4. If you are installing memory modules on the system board, make sure to remove the expansion tray (see
"Remove the processor and memory expansion tray" on page
the system board.
Figure 79. Air baffle removal from the system board
Complete the following steps to install a memory module:
120) and the air baffle that is installed on
.
Chapter 3
Hardware replacement procedures
87
Advertisement
Table of Contents
